3 Series E46 328Ci (M52TU) COUPE
Version with screw cap:
Note:
Do not damage full-flow oil filter cover. Only open and tighten
with socket wrench.
Unfasten full-flow oil filter cover, enabling engine oil to flow out of
oil filter and back into the oil pan.
Installation:
Tightening Torque,
refer to Technical Data 11 42 2AZ.
Installation:
Replace seals and coat with oil.
Open oil drain plug or drain off oil.
Installation:
Replace sealing ring.
Tightening Torque,
refer to Technical Data 11 13 1AZ.
Top up engine oil.
Switch on engine and run at idle until oil indicator lamp goes out.
Stop engine and check oil level.
Note:
Park vehicle on level ground.
RA BMW engine oil service (M50 / M52 / S50US / S52 / M52TU)
BMW AG - TIS
14.02.2013 20:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -