bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

41 Speed Governor > < 3 RA Removing And Installing_replacing 3_2-way Valve (M52TU)|Page 787
Page 1
background image

13 32 051

Replacing fuel filter 

Turn off ignition.

If installed:

Remove engine underguard (1 and 2).

Disconnect fuel feed line at points (1) with special tool 13 3 010.

Caution!

Catch and dispose of escaping fuel.

Release hose clips and disconnect fuel lines from fuel filter.

Installation:

Always replace hose clips and fuel hoses.

Release screw (2) and remove filter from retainer.

Installation:

Observe flow direction (arrow).

Arrow must point in direction of fuel injector block.

RA  Replacing fuel filter

BMW AG - TIS

14.02.2013  23:33

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

41 Speed Governor > < 3 RA Removing And Installing_replacing 3_2-way Valve (M52TU)|Page 787