bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

17 RA Removing And Installing_replacing Molded Roof Lining Trim (C-pillar Trim Panel) > < 15 RA Removing And Installing_replacing Rear Window Frame Trim Panel At Bottom
Page 1
background image

54 21 100

Removing and installing/replacing molded
roof lining on hard top

If necessary, remove hard top.

Remove molded roof lining trim (panel, C-pillar).

Open clothes hook and pull out with a forceful tug.

Installation:

Check clothes hooks for damage (clip lugs) and replace if
necessary.

Fold cover (1) open.

Release screws (2) and remove handle.

Feed molded roof lining (1) out of roof frame (2) all round.

Raise roof lining at front a little, slide towards rear and remove.

RA  Removing and installing/replacing molded roof lining on hard top

BMW AG - TIS

15.02.2013  14:27

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

17 RA Removing And Installing_replacing Molded Roof Lining Trim (C-pillar Trim Panel) > < 15 RA Removing And Installing_replacing Rear Window Frame Trim Panel At Bottom