3 Series E46 330Ci (M54) COUPE
Release screws and remove exhaust bracket (1).
Support transmission with a workshop hoist.
Release screws and remove cross-member (1).
Tightening torque, 23 71 1AZ / 2AZ.
Release screws.
Tightening torque, 26 11 1AZ.
Installation:
Replace self-locking nuts.
Grip propeller shaft and release nuts.
Tightening torque, 26 11 6AZ.
Bend propeller shaft downwards at center bearing (1).
Detach propeller shaft from transmission output flange and tie
back to side on vehicle underbody.
RA Removing and installing transmission (S5D 320Z M52TU/M54)
BMW AG - TIS
15.02.2013 05:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
