3 Series E46 330d (M57) SAL
11 28 020
Removing and installing belt tensioner for
alternator (M57)
Turn off ignition.
Caution!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an alternator
malfunction.
Remove and install A/C compressor drive belt,
refer to 11 28 050.
Remove and install alternator drive belt,
refer to 11 28 010.
Recycling
Catch and dispose of escaping fuel.
Observe country-specific waste-disposal regulations.
RA Removing and installing belt tensioner for alternator (M57)
BMW AG - TIS
15.02.2013 04:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -