bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing_replacing Alternator (M57)|Page 805 > < 3 RA Checking Alternator And Regulator Switch|Page 803
Page 1
background image

12 31 020

Removing and installing/replacing alternator
(M57)

Read fault memory of DDE control unit.

Switch off ignition.

Remove front underbody protection.

Observe instructions for disconnecting and connecting battery.

Disconnect battery negative lead from battery and lay to one side.

Caution!

When working on the oil, coolant or fuel circuit, protect the
alternator against contamination.

Cover alternator with suitable materials.

Failure to comply with this procedure may result in an
alternator malfunction.

Caution!

If the charge air hoses are not fitted without grease and dry,
this will result in supercharger failure.

Fit charge air hoses without grease and dry.

RA  Removing and installing/replacing alternator (M57)

BMW AG - TIS

15.02.2013  05:15

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing_replacing Alternator (M57)|Page 805 > < 3 RA Checking Alternator And Regulator Switch|Page 803