3 Series E46 330d (M57) TOUR
11 12 000
Removing and installing, sealing or replacing
cylinder head cover (M57)
Caution!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an
alternator malfunction.
Caution!
If the charge air hoses are not fitted without grease and dry,
this will result in supercharger failure.
Fit charge air hoses without grease and dry.
Remove air cleaner,
refer to 13 72 001.
Remove air-mass flow sensor,
refer to 13 62 560.
Remove all injectors,
refer to 13 53 320.
Release all bolts (arrows) on cylinder head cover.
Release bolts (1) from outside to inside.
Remove cylinder head cover (3).
Installation:
First tighten bolts (1) from inside to outside.
Tighten down outer bolts diagonally and evenly.
RA Removing and installing, sealing or replacing cylinder head cover (M57)
BMW AG - TIS
15.02.2013 09:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -