3 Series E46 330d (M57) TOUR
Detach vacuum hose to hydraulic engine mounts (1) at distributor
(2).
Remove front end reinforcement.
Installation instructions:
Tightening torque,
refer to Technical Data 31 10 8AZ.
Remove control arm holder from engine support on left and right.
Installation:
Tightening torque,
refer to Technical Data 31 12 7AZ.
Note:
Detach plug from ride level sensor.
Remove sound insulation cover (1).
RA Removing and installing, sealing or replacing oil sump (M57)
BMW AG - TIS
15.02.2013 09:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -