3 Series E46 330d (M57) TOUR
11 23 010
Removing and installing or replacing
vibration damper (M57)
Special tools required:
•
11 6 460
Remove engine underguard.
Remove alternator drive belt.
Remove and install fan cowl.
Position special tool 11 6 460 on vibration damper.
Release screws (1).
Remove vibration damper.
Installation:
Install new screws.
Tighten screws crosswise.
Tightening torque, 11 23 2AZ .
RA Removing and installing or replacing vibration damper (M57)
BMW AG - TIS
15.02.2013 09:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -