bmw Workshop Repair Guides

BMW 3 Series E46 330d TOUR Workshop Service Repair Manual

4 RA Removing And Installing Belt Tensioner For Alternator (M57) > < 3 RA Removing And Installing Alternator Drive Belt (M57 _ M47TU)
Page 2
background image

Release self-locking nut (1).

Installation:

Replace self-locking nut.

Withdraw tensioning roller with lever (1) in direction of arrow.

Loosen screws (1).

Remove belt tensioner (2).

Installation:

Opening on housing of belt tensioner (2) must be turned to
alternator.

Align belt tensioner, insert screws (1) but do not tighten
down. Install tensioning roller with lever and then tighten down
screws (1).

RA  Removing and installing alternator drive belt (M57 / M47TU)

BMW AG - TIS

15.02.2013  09:37

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

4 RA Removing And Installing Belt Tensioner For Alternator (M57) > < 3 RA Removing And Installing Alternator Drive Belt (M57 _ M47TU)