3 Series E46 330d (M57) TOUR
11 28 050
Replacing A/C compressor drive belt (M57 /
M47TU)
Remove front splash guard.
Press belt tensioner back at hexagon head (1).
Remove drive belt (2).
Installation:
Check drive belt for coolant and oil residue and replace if
necessary.
Caution!
The drive belt must be replaced if it is contaminated with
hydraulic fluid.
Fit drive belt and check if it is correctly located on pulleys.
RA Replacing A/C compressor drive belt (M57 / M47TU)
BMW AG - TIS
15.02.2013 09:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -