bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

23 Preheater Plugs > < 1 RA Removing And Installing Or Replacing Glow Plug Relay (M47, M57)
Page 2
background image

Release screw (1) on positive lead.

Installation:

Tightening torque,

refer to Technical Data 12 21 1AZ.

Relay is activated directly by control unit of Digital Diesel
Electronics (DDE).

Note:

Read out fault memory of DDE control unit (DDE = Digital
Diesel Electronics). 

Check stored fault messages. 

Rectify faults.

Now clear the fault memory.

RA  Removing and installing or replacing glow plug relay (M47, M57)

BMW AG - TIS

15.02.2013  10:05

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

23 Preheater Plugs > < 1 RA Removing And Installing Or Replacing Glow Plug Relay (M47, M57)