bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing_replacing Alternator (M57)|Page 808 > < 4 RA Removing And Installing_replacing Alternator (M57)|Page 806
Page 3
background image

Release hose clamp (1).

Tightening torque, 11 65 10AZ.

Detach charge air hose (2) from intercooler on left and remove.

Caution!

Fit charge air hoses without grease and dry.

Rear drive:

Remove acoustic insulation (1) from engine support arm.

Four-wheel drive:

Remove vane pump for power steering.

Rear and four-wheel drives:

Remove protective cap (1).

Release nut of battery positive lead (2) on alternator.

Installation:

Tightening torque, 12 31 1AZ.

Disconnect battery positive lead (2) from alternator.

Detach plug from alternator.

RA  Removing and installing/replacing alternator (M57)

BMW AG - TIS

15.02.2013  10:08

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 3 -

4 RA Removing And Installing_replacing Alternator (M57)|Page 808 > < 4 RA Removing And Installing_replacing Alternator (M57)|Page 806