3 Series E46 330d (M57) TOUR
Installation:
Feed in pedal travel sensor with cable (1) and pulley (2) and
wiring outlet towards top.
Installation:
Feed in pedal travel sensor (1) at an angle from below with
securing eye (2) past steering column and crash disk (3).
Ensure that crash disk (3) is correctly seated on crash sleeve.
Installation:
Turn securing eyes of pedal travel sensor (2) behind retaining
lugs (1) of pedal block.
Adjustment dimension, LHD vehicle:
Observe installation dimension A of cable pulley (1) on pedal
travel sensor (2):
1.
Cable pulley
2.
Pedal travel sensor
3.
Wiring outlet
Caution!
Observe position of wiring outlet (3) when adjusting.
Measurement A: 58
°
RA Removing and installing / replacing pedal travel sensor (M47 / M57)
BMW AG - TIS
15.02.2013 12:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -