3 Series E46 330d (M57) TOUR
Shift transmission into 2nd gear.
Push retaining ring (1) away and drive out straight pin (2).
Unhook selector rod.
Screw in special tool 23 0 210 until it is firmly connected to radial
seal (1).
Pull out radial seal by screwing in screw on special tool.
Drive in radial seal with special tool 23 0 220 .
RA Replacing radial seal for selector shaft (GS5-39DZ)
BMW AG - TIS
15.02.2013 12:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
