3 Series E46 330d (M57) TOUR
Weld cover for side member spare part in door aperture.
Caution!
Do not weld upper welding spots on inside B-pillar (1) as the
inside B-pillar spare part would not then be able to be
installed.
Weld reinforcement plate, cover for front side member.
Weld connection point, cover for front side member.
Fit individual welding spots so close together that a continuous
seam is created.
Locate welding spots in a way which prevents distortion caused by
heat elongation. Ensure that welded areas have cooled down
sufficiently.
Danger of distortion!
Weld reinforcement plate, cover for rear side member.
Weld connection point, cover for rear side member.
Fit individual welding spots so close together that a continuous
seam is created.
Locate welding spots in a way which prevents distortion caused by
heat elongation. Ensure that welded areas have cooled down
sufficiently.
Danger of distortion!
Weld reinforcement plates, outside B-pillar.
Weld connection point, outside B-pillar.
Fit individual welding spots so close together that a continuous
seam is created.
RA Replacing cover for side member, left or right (partial replacement, B-pillar be
BMW AG - TIS
15.02.2013 17:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -