bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing_replacing All Trims For Rear Lid (Touring)|Page 2512 > < 2 RA Removing And Installing_replacing All Trims For Rear Lid (Touring)|Page 2510
Page 3
background image

(B) Trim on rear lid, side outside:

Release trim on rear lid, top center,

refer to (A).

Release trim on rear lid, outside bottom,

refer to (B).

Lever out retainers (1) of trim (2) with special tool 00 9 317.

Lever out clips (1) of trim (2) with special tool 00 9 317.

Installation:

If necessary, replace faulty connector inserts (1).

Installation:

Following parts of trim (1) must not be damaged:

2

Mounts for swallow-tail guide

4

Clip mounts

5

Swallow-tail guide

If necessary, fit foam straps (3).

RA  Removing and installing/replacing all trims for rear lid (Touring)

BMW AG - TIS

15.02.2013  19:23

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 3 -

2 RA Removing And Installing_replacing All Trims For Rear Lid (Touring)|Page 2512 > < 2 RA Removing And Installing_replacing All Trims For Rear Lid (Touring)|Page 2510