3 Series E46 330d (M57) TOUR
All:
Release screws (1).
Remove lines (2) and (3).
Installation:
Replace sealing rings.
Observe tightening torque, 64 52 1AZ.
Disconnect plug connection (4) in direction of arrow.
S54 and AWD only:
Release and lower front stabilizer bar.
All:
Note:
Secure A/C compressor (2) against falling out.
Release screws (1) and remove A/C compressor (2).
RA Removing and installing/replacing complete A/C compressor
BMW AG - TIS
15.02.2013 22:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -