3 Series E46 330i (M54) SAL
-
The spring mounts must not be cleaned with cleaning agents.
-
Preservation wax on the spring mounts and coils does not have to be removed.
3.
Powder the spring mounts of the barrel springs (1) from the underside with commercially
available talc. When doing this, apply the talc evenly across the entire area of the spring
mounts with a fine paintbrush.
4.
When powdering the upper spring mount, it is unavoidable that talc will fall onto the
lower spring mount. Then this happens:
-
Do not wipe the spring coils down.
-
Spread the talc in the same way evenly across the entire area of the lower spring
mounts with a fine paintbrush.
Parts:
Commercially available talc.
Reimbursement:
Material and labour costs incurred can be claimed through the usual warranty channels
subject to current warranty terms as follows:
Defect code
33 53 90 39 00
Talc spring mounts/rear axle
Job number
00 51 454
Labour
5 FRUs
Warranty type
1
Warranty stage
1
Reimbursement is limited to 36 months/100,000 km and only possible until June 2000 .
SI Snapping, knocking and smacking noises from the rear of the vehicle (rear axle/f
BMW AG - TIS
15.02.2013 13:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -