3 Series E46 330xd (M57) TOUR
Unclip lines (1) from lower bracket.
Detach hose (2).
Remove intake pipe (3).
Installation:
Apply a thin coat of petroleum jelly to sealing surfaces of
sealing rings (1).
Insert sealing rings (1) in intake snorkel.
Release hose clamp (1) on charge air hose.
Tightening torque,
refer to Technical Data 11 65 10AZ.
Detach charge air hose.
Caution!
Fit charge air hoses without grease and dry.
Release screw (2).
Release clamp (1) on EGR pipe.
Release screw (2).
Release screws (3) and press heat shield in direction of arrow.
Remove EGR pipe.
RA Removing and installing or replacing coolant thermostat (M57)
BMW AG - TIS
15.02.2013 21:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
