Removing and Installing Exhaust Turbocharger on 3 Series E46 330xd
Release hose clamp (1).
Tightening torque,
refer to Technical Data 11 65 10AZ.
Detach charge air hose (2).
Caution!
Fit charge air hoses without grease and dry.
Release hose clamp (1).
Tightening torque,
refer to Technical Data 11 65 10AZ.
Remove charge air pipe (2) with charge air hose completely.
Caution!
-
Fit charge air hoses without grease and dry.
-
Seal turbocharger openings with a cap immediately.
Release banjo bolt (1).
Tightening torque,
refer to Technical Data 11 65 7AZ.
Disconnect oil line (2).
Note:
Seal connection of oil line and bore in crankcase with a cap.
Installation:
Replace sealing rings.
Release screws (1).
Remove bracket completely and lay to one side.
Installation:
Layout of vacuum hoses,
refer to 11 74 ...
RA Removing and installing or replacing exhaust turbocharger (M57)
BMW AG - TIS
15.02.2013 21:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -