bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Replacing Control Unit (DDE) For M47 And M57|Page 882 > < 12 RA Replacing Pressure Regulator On High-pressure Pump (M57)|Page 879
Page 1
background image

13 61 501

Replacing control unit (DDE) for M47 and M57

Follow instructions for removing and installing electronic
control units,

refer to General Information in MG 12.

Read fault memory of DDE control unit. Switch off ignition.

Follow instructions for disconnecting and connecting battery,

refer to General Information MG 12.

Disconnect and cover battery negative lead.

Installation location of control unit:

In electronics box in direction of travel on left.

Release screws (1) and remove cover.

Tightening torque,

refer to Technical Data 12 90 4AZ.

Disconnect plug connection (1).

Unlock glow plug relay (2) with a screwdriver (3) and remove
towards top.

RA  Replacing control unit (DDE) for M47 and M57

BMW AG - TIS

15.02.2013  22:21

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Replacing Control Unit (DDE) For M47 And M57|Page 882 > < 12 RA Replacing Pressure Regulator On High-pressure Pump (M57)|Page 879