3 Series E46 330xd (M57) TOUR
Release screw (1).
Tightening Torque,
refer to Technical Data 13 62 8AZ.
Remove pulse generator.
Installation:
For assembly, apply a thin coat of petroleum jelly to sealing
ring (1).
Mount pulse generator and screw down.
Turn on ignition.
Carry out a function check.
Read out fault memory of DDE control unit.
Check stored fault messages.
Rectify fault and clear fault memory.
RA Replacing camshaft pulse generator (M57)
BMW AG - TIS
15.02.2013 22:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -