3 Series E46 330xd (M57) TOUR
22 31 001
Replacing rubber mount for transmission
mounting (4WD)
Special tools required:
•
22 1 014
•
22 1 015
•
22 1 016
•
22 1 017
•
22 1 018
•
33 3 144
•
33 3 145
Remove exhaust system.
Remove rear underbody protection from assemblies.
Support transmission with transmission lifter.
Remove cross-member for transmission mounting.
Place special tool 22 1 016 on opening (1) and insert screw (2)
until hand-tight against housing.
Remove rubber mount with special tools 22 1 017 /
22 1 018 and 33 3 144 /33 3 145 .
Installation:
Arrow on rubber mount must point to arrow on housing.
Coat housing bore and rubber mount with Circolight, refer to
BMW Parts Service.
RA Replacing rubber mount for transmission mounting (4WD)
BMW AG - TIS
15.02.2013 23:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -