3 Series E46 330xd (M57) TOUR
Expand and withdraw bearing bushing (1) using a suitable tool.
Important!
Expand bearing bushing (1) at specified indent (2) only.
Bore hold must not be damaged!
Drive in bearing bushing (1) with special tool (see table) as far
as it will go.
Important!
Make sure you use the correct special tool, as the different
tools have different dimensions!
5th gear
23 4 022 (short)
Reverse gear
23 4 023 (long)
Drive in sealing cap (1) with special tool
23 4 021 .
Fit retaining ring.
RA Replacing bearing bushing for 5th/reverse gear locking pin (F transmission) - tr
BMW AG - TIS
15.02.2013 23:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -