3 Series E46 330xd (M57) TOUR
Fit special tool 23 0 250 on output flange (1).
Release collar nut with special tool 23 0 200 .
Tightening torque: 23 21 1AZ
.
Installation:
Insert collar nut with Loctite 243.
-
Loctite 243: BMW Parts Service.
Detach output flange (1) with three-claw extractor tool (2) from
output shaft.
Installation:
Heat output flange (1) to approx. 80
°
C and push onto output
shaft.
Remove radial seal (1) with special tool 00 5 010 .
RA Replacing radial seal for output flange (GS5-39DZ, 4WD)
BMW AG - TIS
15.02.2013 23:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -