3 Series E46 330xd (M57) TOUR
Note on installation M57:
Press center bearing (2) into transmission tunnel.
Lower transmission until cylinder head touches bulkhead.
Suspend special tool 11 8 022 from left and right control arms.
Caution!
Position special tool 11 8 022 in such a way that engine oil
sump rests safely on special tool.
Tighten down knurled screws until special tool 11 8 022 rests
against engine oil sump.
Unlock cable plug (1) and disconnect.
Unclip cable from transmission housing.
Release screw (1).
Withdraw hydraulic lines (2) to oil cooler from transmission
housing.
Installation:
Replace sealing rings.
RA Removing and installing automatic transmission (A5S 360R / 390R, M47/ M57)
BMW AG - TIS
15.02.2013 23:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -