3 Series E46 330xd (M57) TOUR
Lift out retaining ring (1).
Installation:
Replace retaining ring (1).
Pull off gaiter (1) over shaft (2).
Carefully clean all parts with a cloth.
Note:
Regrease constant-velocity joint with the grease from the repair
kit.
Replacing gaiter of transmission-side joint:
Release band clamps (1, 2).
Pull back gaiter (3).
Detach tulip element (4).
Remove retaining ring (1).
Installation:
Replace retaining ring (1).
Detach tripod element (2) from shaft (3).
Pull off gaiter over shaft (3).
Carefully clean all parts with a cloth.
RA Replacing both gaiters on left and right of output shaft
BMW AG - TIS
16.02.2013 01:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
