3 Series E46 330xd (M57) TOUR
Mark out and cut partition area for door pillar spare part for cowl
panel, top.
1..4 = Bores for trim strip
Measurement (A) = 80 mm from 4th bore for trim strip.
Mark out and cut partition area for door pillar spare part for cover
for side member.
Measurement (A) = 140 mm.
1 = 1st bore for finishing strip, entrance
2 = 2nd bore for finishing strip, entrance
Make reinforcement plate from remaining metal sheet for cowl
panel connection, top.
Width approx. 40 mm.
Make reinforcement plate from remaining metal sheet for cover
connection for side member.
Width approx. 60 mm.
RA Replacing front left door column (partial replacement) (front side panel removed
BMW AG - TIS
16.02.2013 04:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
