bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

47 Floor-lugg.comp.-eng.comp.tr.panels > < 3 RA Removing And Installing_replacing Trim For Pedal Assembly|Page 2496
Page 1
background image

51 46 050

Removing and installing / replacing finisher
for rear apron at top (touring)

Remove both trims for roof pillar (D-pillar),

refer to 51 43 252.

Release screws (1).

Lever out protective caps (3) at openings (2), remove and release
screws underneath.

Screw out trim (4) towards inside and remove.

Installation:

If necessary, replace faulty inserts (1).

Replacement only:

Fit trim (1) for emergency release on trim (2).

RA  Removing and installing / replacing finisher for rear apron at top (touring)

BMW AG - TIS

16.02.2013  06:45

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

47 Floor-lugg.comp.-eng.comp.tr.panels > < 3 RA Removing And Installing_replacing Trim For Pedal Assembly|Page 2496