3 Series E46 330xi (M54) SAL
11 12 000
Removing and installing, sealing cylinder
head cover (M52TU / M54 / M56)
Remove engine cover.
Remove ignition coils.
Remove wiring harness of ignition coils from cylinder head cover
and place to one side.
Note:
Illustration on M54 engine.
Press lock.
Pull off the hose for the engine breather.
Remove grounding straps (1).
Remove cylinder head cover.
Installation:
Remove sealing debris from sealing faces of cylinder head and
cylinder head cover.
Apply a sealing bead of Drei Bond 1209 (refer to BMW Parts
Service) on left and right sides at transition between cylinder head
and VANOS adjustment unit.
RA Removing and installing, sealing cylinder head cover (M52TU / M54 / M56)
BMW AG - TIS
16.02.2013 06:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -