Replacing Camshaft on 3 Series E46 330xi (M54): Step-by-Step Guide
Position sensor gear on inlet camshaft.
Fit thrust washer and tighten down with dowels.
Tightening torque 11 31 11AZ
.
Feed chain wheel onto timing chain so that arrow on chain wheel
faces separating face of upper side of cylinder head.
Insert special tool 11 4 220 in cylinder head and bring
adjustment screw into contact with tensioning rail, but do not
pretension timing chain yet.
Check arrow on chain wheel to separating face of upper side of
cylinder head, reposition chain wheel if necessary.
RA Replacing camshaft (M52TU / M54 / M56)
BMW AG - TIS
16.02.2013 06:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 12 -
