3 Series E46 330xi (M54) SAL
Release both starter motor mounting bolts (1) on transmission:
Release starter mounting bolts from transmission output end with
a long extension and a universal joint.
Installation:
Tightening torque, 12 41 1AZ
.
Withdraw starter motor (1) from transmission flange and remove
towards bottom.
Installation:
Check starter motor pinion and ring gear for damage.
RA Removing and installing/replacing starter motor (M54 4WD)
BMW AG - TIS
16.02.2013 07:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
