3 Series E46 330xi (M54) SAL
Lever out spring (1) with a screwdriver from lug (2) on housing.
Tilt spring upwards.
Pull out both bearing pins (1).
Installation:
Grease bearing pins (1).
Grease,
Refer to BMW Service Operating Fluids.
Lift out shift arm (1).
Note:
Pressure line of clutch slave cylinder remains connected.
Important!
Slowly relieve tension on clutch slave cylinder otherwise air is
drawn in through sealing sleeve.
Release nuts and remove clutch slave cylinder.
Tightening torque, 21 52 5AZ .
RA Removing and installing transmission (GS6-37BZ, AWD)
BMW AG - TIS
16.02.2013 08:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -