3 Series E46 330xi (M54) SAL
Fit special tool 00 0 200 to special tool 00 0 201 /
00 0 202 / 00 0 204 / 00 0 208 and attach.
Suspend special tool 00 0 200 from front engine suspension
lug.
Note:
Contact faces (1) of special tool 00 0 208 must rest on screw
connection of both side walls.
Tighten the screws (1 and 2).
Release nut at top on right engine mount.
Release nut at bottom on left engine mount.
Remove engine underguard (1) at front, middle and rear.
RA Removing and installing automatic transmission (A5S 360R / 390R, 4WD, M54)
BMW AG - TIS
16.02.2013 09:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
