3 Series E46 330xi (M54) SAL
Installation:
Bore on driver must point to center of aperture in cover plate.
Installation:
Twist torque converter on transmission until bores on lugs
point to center of bore on flywheel.
Screw special tool 24 2 300 into lug.
Installation:
Raise automatic transmission until bore on driver is reached.
Carefully insert transmission into bore on driver with special
tool 24 2 300 .
Attach transmission case to engine flange.
Remove special tool 24 2 300 from lug towards front.
RA Removing and installing automatic transmission (A5S 360R / 390R, 4WD, M54)
BMW AG - TIS
16.02.2013 09:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -
