3 Series E46 330xi (M54) SAL
26 11 000
Removing and installing propeller shaft -
version with rear constant-velocity joint -
Remove complete exhaust system.
Remove heat shield (1).
Release screws.
Tightening torque 26 11 1AZ .
Installation:
Only tighten screw connection by way of nut.
Replace nuts.
Remove constant-velocity joint from final drive.
RA Removing and installing propeller shaft - version with rear constant-velocity jo
BMW AG - TIS
16.02.2013 10:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -