3 Series E46 330xi (M54) SAL
27 10 020
Installing replacement transfer case
Important!
After replacement, the "Repair" service function must be
carried out with GT1.
Note on E53:
After completing work, check gear oil level and top up if
necessary.
Filler plug (1):
Tightening torque 27 2 7AZ .
Fluid level to lower edge of filler plug.
Fill quantity.
Note on E46:
After completing work, check gear oil level and top up if
necessary.
Filler plug (1):
Tightening torque 27 2 7AZ .
Fluid level to lower edge of filler plug.
Fill quantity.
Important!
Use only the approved gear oil in this transfer case.
Failure to comply with this requirement will result in serious
damage to the transfer case!
RA Installing replacement transfer case
BMW AG - TIS
16.02.2013 10:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
