3 Series E46 330xi (M54) SAL
Remove drive flange with special tool 33 1 150 .
Drive a hole into radial shaft seal (2) using a center punch (1).
See illustration.
Important!
Do not use a drill as drillings may result in transmission
malfunction.
Install special tool 23 0 490 .
Drive out radial shaft seal (1) with impact weight (2).
Attach special tool 27 1 343 to output shaft.
Push radial shaft seal (1) onto housing.
RA Replacing radial shaft seal for output flange
BMW AG - TIS
16.02.2013 10:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -