3 Series E46 330xi (M54) SAL
31 50 000
Removing and installing/replacing front
differential (M54)
Special tools required:
•
00 0 200
•
00 0 201
•
00 0 202
•
00 0 204
•
00 0 208
•
00 2 030
•
31 2 220
Necessary preliminary tasks:
•
Disconnect battery, grounding strap to body.
•
Remove heater bulkhead
•
Move engine bonnet/hood into service position
After installation:
•
Replacement only: fill with front differential oil
•
Check front differential oil level, correct if necessary
•
Carry out steering angle sensor adjustment
Assemble special tools 00 0 200 with special tools 00 0 201
/
00 0 202 / 00 0 204 / 00 0 208 and attach.
Secure special tool 00 0 200 to front engine suspension eye.
Note:
Contact faces (1) of special tool 00 0 208 must rest on screw
connection of both side walls.
Tighten down screws (1 and 2).
RA Removing and installing/replacing front differential (M54)
BMW AG - TIS
16.02.2013 10:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
