3 Series E46 330xi (M54) SAL
Lever out wheel arch liner (1) on left/right with fishbone
00 9 321 , pulling bumper (2) forwards slightly in so doing.
Firmly pull off bumper on both sides towards front. In so doing,
grip primarily edge of wheel arch (1) (do not pull at sides).
Caution!
Do not pull bumper too far; there is a risk of damage to the
electrical fittings (connecting cable, air horn, fog lamps).
Installation:
Retaining lugs (1) must not be damaged.
Disconnect plug connections (1) of air horn on left/right.
Version with fog lamps:
Also disconnect plug connections (2) of fog lamps on left/right.
Remove bumper (3) towards front.
RA Removing and installing complete front bumper (from 10/01)
BMW AG - TIS
16.02.2013 14:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -