3 Series E46 M3 (S54) COUPE
11 28 010
Replacing alternator drive belt (S54)
Note:
If the drive belt is to be subsequently reused:
Mark direction of travel and reinstall drive belt in same
direction of travel.
Remove fan clutch with fan impeller.
Remove A/C compressor drive belt.
Place on screw connection of tensioning wheel and compress belt
tensioner slowly and carefully.
Hold belt tensioner under tension, remove drive belt.
Caution!
If contaminated with hydraulic fluid: Replace drive belt.
Installation:
Check drive belt for coolant and oil residue and replace if
necessary.
Installation:
Fit drive belt and check if it is correctly located on pulleys.
RA Replacing alternator drive belt (S54)
BMW AG - TIS
16.02.2013 12:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -