3 Series E46 M3 (S54) COUPE
Connect special tool 12 6 050 in conjunction with special tool
12 6 411 (from special tool kit 12 6 410 ) to solenoid valves.
Connect special tool 12 6 411 to correct terminals on car
battery.
Alternately press toggle switch buttons 1 and 2 several times on
special tool 12 6 050 .
Press and hold down toggle switch button 1 on special tool
12 6 050 .
At same time, rotate inlet camshaft at hexagon drive against
direction of rotation as far as it will go.
Note:
Spline teeth in VANOS gear are engaged; and inlet camshaft
cannot be rotated further.
Alternately press toggle switch buttons 3 and 4 several times on
special tool 12 6 050 .
Press and hold down toggle switch button 3 on special tool
12 6 050 .
At same time, rotate exhaust camshaft at hexagon drive against
direction of rotation as far as it will go.
Note:
Spline teeth in VANOS gear are engaged; and exhaust camshaft
cannot be rotated further.
RA Replacing camshafts (S54)
BMW AG - TIS
16.02.2013 12:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -