3 Series E46 M3 (S54) COUPE
11 36 010
Removing and installing, sealing/replacing
VANOS adjustment unit (S54)
Special tools required:
•
11 5 100
•
11 6 050
•
11 7 130
•
11 7 200
•
12 6 050
•
12 6 410
•
12 6 411
Important!
When the engine is switched off, VANOS moves the
camshafts to a position which is advantageous to engine
starting.
The camshafts and the VANOS adjustment unit must be
placed in the installation position before the VANOS
adjustment unit is removed.
Necessary preliminary tasks:
•
Read fault memory and make a documentary record.
•
Perform VANOS test.
•
Remove cylinder head.
•
Remove all spark plugs.
•
Remove fan clutch with impeller and fan cowl (not from E85).
•
Disconnect fuel rail.
Unscrew screws (1).
Remove sliding rail (2).
Unscrew screws (3).
Remove holder (4).
Important!
Bolts can fall into the engine.
RA Removing and installing, sealing/replacing VANOS adjustment unit (S54)
BMW AG - TIS
16.02.2013 13:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -