3 Series E46 M3 (S54) COUPE
11 53 000
Removing and installing/replacing coolant
thermostat (S54)
Remove fan clutch with fan impeller and fan cowl.
Remove coolant drain plug in engine block. Drain and dispose of
coolant.
Installation:
Replace sealing ring on drain plug.
Tightening torque 11 11 5AZ.
Vent cooling system and check for leaks.
Remove intake filter housing with air-mass flow sensor.
Remove water hoses.
Open cable clamp (1).
Release screws on thermostat housing. Remove thermostat
housing and thermostat.
RA Removing and installing/replacing coolant thermostat (S54)
BMW AG - TIS
16.02.2013 13:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -