3 Series E46 M3 (S54) COUPE
Note:
Exhaust manifolds (1 and 2) cannot be removed individually.
Detach exhaust manifold (1) from cylinder head and place on
engine support arm.
Detach exhaust manifold (2) from cylinder head.
Feed out exhaust manifolds (1 and 2) together.
Installation:
Clean sealing faces, replace gaskets.
Coat threads with copper paste.
Replace nuts.
Tightening torque, 11 62 1AZ.
Caution!
Ensure cables are exactly routed.
Installation:
Clip cables of oxygen sensors into mounts on shield plate of
exhaust manifold.
Note:
Fig. shows US version.
RA Removing and installing, sealing/replacing both exhaust manifolds (S54)
BMW AG - TIS
16.02.2013 13:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
