3 Series E46 M3 (S54) COUPE
13 63 555
Replacing throttle potentiometer (S54)
Interrogate fault memory of DME control unit.
Turn off ignition.
Unlock plug (1) and detach from throttle potentiometer (2).
Release screws (3).
Remove throttle potentiometer (2) from throttle assembly of
cylinder 1.
Caution!
After working on throttle system (throttle assembly,
servomotor, potentiometer), carry out electronic throttle test
with DIS Tester or MoDiC without fail:
-
Service functions
-
DME system checks
-
Function test
Note:
Interrogate fault memory of DME control unit.
Check stored fault messages.
Rectify faults.
Then clear fault memory.
RA Replacing throttle potentiometer (S54)
BMW AG - TIS
16.02.2013 14:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
