3 Series E46 M3 (S54) COUPE
21 52 511
Replacing clutch slave cylinder (S6S 420G
SMG)
Note:
After completing work:
Proceed in accordance with test program,
refer to "Service Functions" in DIS Tester.
Read out fault memory and clear fault entries.
Check fluid level in hydraulic system.
Depressurize hydraulic system.
Remove rear underbody protection.
Detach cable plug (1).
Unclip cable.
Release union screw (1) on hydraulic line.
Tightening torque, 21 52 7AZ.
Clip hydraulic line (2) out of retaining fixture (3).
Release nuts and remove clutch slave cylinder (4).
Tightening torque, 21 52 5AZ.
Installation:
Replace retaining fixture (3).
RA Replacing clutch slave cylinder (S6S 420G SMG)
BMW AG - TIS
16.02.2013 15:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -