3 Series E46 M3 (S54) COUPE
21 53 010
Removing and installing/replacing hydraulic
unit (S6S 420G SMG)
Note:
After completing work:
Proceed in accordance with test program,
refer to "Service Functions" in DIS Tester.
Read out fault memory and clear entered faults.
Check fluid level in hydraulic system.
Depressurize hydraulic system.
Disconnect battery, battery positive lead from battery positive
terminal.
Remove intake air manifold.
Unlock plug (1) on hydraulic unit from below and detach.
RA Removing and installing/replacing hydraulic unit (S6S 420G SMG)
BMW AG - TIS
16.02.2013 15:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
