3 Series E46 M3 (S54) COUPE
23 12 081
Replacing radial seal on selector shaft (S6S
420G)
Special tools required:
•
23 0 210
•
23 0 220
Important!
Check gear oil level after completing tasks.
Use only approved gear oil.
Failure to comply with this requirement will result in serious
damage to the transmission.
Necessary preliminary tasks:
•
Shift transmission into 2nd gear.
•
Remove rear splash guard.
•
Remove complete exhaust system (E38).
•
Remove exhaust catalytic converter and intermediate
pipes (E46 S54 only).
Remove heat shield (1).
RA Replacing radial seal on selector shaft (S6S 420G)
BMW AG - TIS
16.02.2013 15:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -